OIL PUMPS,WORMS,HOSES

OIL PUMPS,WORMS,HOSES

Buy Reliable Oil Pump, Worm, and Hose from Chainsaw Parts Online

Oil is essential for the lubrication of the chain and guide bar. Without it, the friction between the chain and the bar and the object and the chainsaw will increase, resulting in heating. It will also strain the engine and reduce its life if not lubricated for a long time. An oil pump manages the presence of oil throughout the chain and the guide bar when it is operated. The oil pump is attached to the clutch, and it flows the oil through the hose into the hole and over the guide bar. The proper working of oil pump can be checked in the following ways:

Oil tank level: If there is full oil even after several usages, the oil pump is not channelling the oil.

Manual check: Check the chain by running your hand over it or using tissue paper. If it is dry, then the oil pump should be taken out and replaced.

Oil spit: Use an object and hold the chainsaw about an inch or two, turn it on, and see if oil spits on the object afterward.

An oil worm is a small l shaped part attached to a circular drum fitted under the clutch and rotates when the machine is started to provide the oil uniformly. These are usually made of metal and plastic. Irregular pressing of clutch or not filling oil will cause this part to break off, and the oil will start leaking to the bottom of the chainsaw instead of reaching the bar and chain.

The oil line or hose is a small tube with a filter attached which provides the supply of oil from the oil tank and is made up of rubber which develops cracks or gets punctured with time. It can be checked when there is plenty of oil on the saw bed, also the oil tank becomes empty frequently. The oil line is present under the handle, and its replacement requires the removal of the front handle and chainsaw cover.

Buy high-quality and low-priced oil pumps, worms, hoses from Chainsaw Parts Online shop. Choose from the best fit and verify from the pictures given on the product page. Our manufacturers thoroughly test these, and many come with a two-year warranty, so if any defect occurs, a replacement will be provided as they are hard to repair. The oil pump can be easily replaced and does not need any special tools. Remove the nuts screwing the clutch cover, disengage the chain cover, and unthread the clutch from the crankshaft.

Further, unscrew the oil pump and front cover. Replace the old oil pump with a new one and follow the reverse process to make your chainsaw running smoothly as before. Ensure there is sufficient oil in the guide bar hole and use an air compressor to remove sawdust or dirt, do not run the chainsaw dry to prevent burning of the guide bar and chain breakage.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Husqvarna Oil Pump Worm Gear for T425, T435, T525 Husqvarna Oil Pump Worm Gear for T425, T435, T525

    Copy of For Husqvarna Oil Pump Worm Gear for T425, T435, T525 chainsaws OEM 593825301 505053101 522006001

    BASEH

    £6.90 Inc. VAT
    £5.75 Ex. VAT
     For Husqvarna  T 425, T 435, T 525 chainsaws   Oil Pump Worm Gear   Replaces  OEM    593825301 505053101 522006001 Quality spare parts from Turkey
    £6.90 Inc. VAT
    £5.75 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £6.90 Inc. VAT
    £5.75 Ex. VAT
    Subtotal:
  • Husqvarna 281, 288 Oil Pump Worm Wheel Husqvarna 281, 288 Oil Pump Worm Wheel

    For Husqvarna 281, 288 Oil Pump Worm Wheel 501 80 30 01, 501803001, 501 80 30-01

    BASEH

    £6.90 Inc. VAT
    £5.75 Ex. VAT
     For Husqvarna  281, 288 chainsaws   Oil Pump Worm Wheel   Replaces  OEM    501 80 30 01, 501803001, 501 80 30-01   Quality spare parts from Turkey
    £6.90 Inc. VAT
    £5.75 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £6.90 Inc. VAT
    £5.75 Ex. VAT
    Subtotal:
  • OIL PUMP WORM DRIVE GEAR FOR HUSQVARNA 281 288 288XP 394 395 OEM 503 55 75-01 OIL PUMP WORM DRIVE GEAR FOR HUSQVARNA

    OIL PUMP WORM DRIVE GEAR FOR HUSQVARNA 281 288 288XP 394 395 OEM 503 55 75-01

    CPO

    £5.49 Inc. VAT
    £4.57 Ex. VAT
    OIL PUMP WORM FOR HUSQVARNA    281 288 288XP 394 395     Replaces  503 55 75-01
    £5.49 Inc. VAT
    £4.57 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £5.49 Inc. VAT
    £4.57 Ex. VAT
    Subtotal:
  •  Fuel tank and Oil tank pipe hose line set For STIHL

    Fuel tank and Oil tank pipe hose line set For STIHL 017 018 MS170 MS180 Chainsaw

    HEMOGUM

    £6.40 Inc. VAT
    £5.33 Ex. VAT
    Fuel and Oil hoses lines pipes For STIHL 017 018 MS170 MS180 models   Replaces OEM 1130 358 7700 and 1130 647 9400 Top quality parts  Made in EUROPE
    £6.40 Inc. VAT
    £5.33 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £6.40 Inc. VAT
    £5.33 Ex. VAT
    Subtotal:
  • OIL PUMP WORM DRIVE FOR CHINESE CHAINSAW 3800 38CC OIL PUMP WORM DRIVE FOR CHINESE CHAINSAW 3800 38CC

    OIL PUMP WORM DRIVE FOR CHINESE CHAINSAW 3800 38CC ,Made in EU

    PEJO

    £3.99 Inc. VAT
    £3.32 Ex. VAT
    OIL PUMP WORM DRIVE FOR CHINESE CHAINSAW 3800 38CC  ID 10,4 mm as per pictures Top quality replacement part Made in Europe
    £3.99 Inc. VAT
    £3.32 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £3.99 Inc. VAT
    £3.32 Ex. VAT
    Subtotal:
  •  Oil pump worm gear For Husqvarna 435 440 135  Oil pump worm gear For Husqvarna 435 440 135

    Oil pump worm gear For Husqvarna 435 440 135 Jonsered CS2240 saws OEM 544212401

    PEJO

    £4.49 Inc. VAT
    £3.74 Ex. VAT
    For Husqvarna 435 440 135 Jonsered CS2240 chainsaws   oil pump drive worm gear   Replaces 544212401   This part is not compatible with Husqvarna 130 135 Mark II models     Top Quality product, Made in Europe
    £4.49 Inc. VAT
    £3.74 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.49 Inc. VAT
    £3.74 Ex. VAT
    Subtotal:
  • Oil pump drive worm gear For Husqvarna 346 346XP 351 353 Oil pump drive worm gear For Husqvarna 346 346XP 351 353

    Oil pump drive worm gear For Husqvarna 346 346XP 351 353 chainsaws #503 89 21-02

    PEJO

    £4.49 Inc. VAT
    £3.74 Ex. VAT
    For HUSQVARNA 346 346XP 351 353 chainsaws   oil pump worm gear   Please note,this will fits   For 325 '' pitch clutch drums /sprockets /chains only     Replaces 503 89 21-02      Top...
    £4.49 Inc. VAT
    £3.74 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.49 Inc. VAT
    £3.74 Ex. VAT
    Subtotal:
  • Oil pump worm gear 325'' For Husqvarna 350 chainsaws Oil pump worm gear 325'' For Husqvarna 350 chainsaws

    Oil pump worm gear 325'' For Husqvarna 350 chainsaws OEM 5038922-02

    PEJO

    £4.69 Inc. VAT
    £3.91 Ex. VAT
    For HUSQVARNA 350 chainsaws   oil pump worm gear   Please note,this will fits   For 325 '' pitch clutch drums /sprockets /chains only     Replaces 5038922-02      Top Quality product, Made in Europe
    £4.69 Inc. VAT
    £3.91 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.69 Inc. VAT
    £3.91 Ex. VAT
    Subtotal:
  • Oil Pump Worm Gear for Husqvarna 455, 455E RANCHER, 460, 461 Oil Pump Worm Gear for Husqvarna 455, 455E RANCHER, 460, 461

    Oil Pump Worm Gear for Husqvarna 455, 455E RANCHER, 460, 461 chainsaw 5372526-01

    PEJO

    £4.60 Inc. VAT
    £3.83 Ex. VAT
     HUSQVARNA 455, 455E RANCHER, 460, 461    oil pump worm gear     Replaces 5372526-01     Top Quality product, Made in Europe
    £4.60 Inc. VAT
    £3.83 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.60 Inc. VAT
    £3.83 Ex. VAT
    Subtotal:
  • OIL PUMP WORM FOR STIHL 064 066 MS640 MS650 MS660 OIL PUMP WORM FOR STIHL 064 066 MS640 MS650 MS660

    OIL PUMP WORM FOR STIHL 064 066 MS640 MS650 MS660 CHAINSAWS 1122 640 7105

    PEJO

    £6.90 Inc. VAT
    £5.75 Ex. VAT
    OIL PUMP WORM DRIVE For STIHL 064 066 MS640 MS650 MS660   Replaces OEM 1122 640 7105 Made in Europe
    £6.90 Inc. VAT
    £5.75 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £6.90 Inc. VAT
    £5.75 Ex. VAT
    Subtotal:
  • Oil pump worm gear 325'' For Husqvarna 346 346XP 351 353 Oil pump worm gear 325'' For Husqvarna 346 346XP 351 353

    Oil pump worm gear 325'' For Husqvarna 346 346XP 351 353 chainsaws #503 89 21-02

    CPO

    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Husqvarna 346xp,351,353 oil pump worm gear . Suitable only for 325 chains. Brand new. Replaces OEM 503892102    
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Subtotal:
  • Oil Pump Oiler For Husqvarna 235, 236, 240 McCulloch Oil Pump Oiler For Husqvarna 235, 236, 240 McCulloch

    Oil Pump Oiler For Husqvarna 235, 236, 240 McCulloch CS340, CS380 Chainsaws #574719301, 581063901

    PEJO

    £6.49 Inc. VAT
    £5.41 Ex. VAT
    FOR Husqvarna 235, 236, 240 & McCulloch CS340, CS380    Oil pump    Replaces 574 71 93-01, 530057935, 581063901  Good quality parts Made in  Serbia
    £6.49 Inc. VAT
    £5.41 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £6.49 Inc. VAT
    £5.41 Ex. VAT
    Subtotal:
  • Total: items /

Adding your products to cart