OIL PUMPS,WORMS,HOSES

OIL PUMPS,WORMS,HOSES

Buy Reliable Oil Pump, Worm, and Hose from Chainsaw Parts Online

Oil is essential for the lubrication of the chain and guide bar. Without it, the friction between the chain and the bar and the object and the chainsaw will increase, resulting in heating. It will also strain the engine and reduce its life if not lubricated for a long time. An oil pump manages the presence of oil throughout the chain and the guide bar when it is operated. The oil pump is attached to the clutch, and it flows the oil through the hose into the hole and over the guide bar. The proper working of oil pump can be checked in the following ways:

Oil tank level: If there is full oil even after several usages, the oil pump is not channelling the oil.

Manual check: Check the chain by running your hand over it or using tissue paper. If it is dry, then the oil pump should be taken out and replaced.

Oil spit: Use an object and hold the chainsaw about an inch or two, turn it on, and see if oil spits on the object afterward.

An oil worm is a small l shaped part attached to a circular drum fitted under the clutch and rotates when the machine is started to provide the oil uniformly. These are usually made of metal and plastic. Irregular pressing of clutch or not filling oil will cause this part to break off, and the oil will start leaking to the bottom of the chainsaw instead of reaching the bar and chain.

The oil line or hose is a small tube with a filter attached which provides the supply of oil from the oil tank and is made up of rubber which develops cracks or gets punctured with time. It can be checked when there is plenty of oil on the saw bed, also the oil tank becomes empty frequently. The oil line is present under the handle, and its replacement requires the removal of the front handle and chainsaw cover.

Buy high-quality and low-priced oil pumps, worms, hoses from Chainsaw Parts Online shop. Choose from the best fit and verify from the pictures given on the product page. Our manufacturers thoroughly test these, and many come with a two-year warranty, so if any defect occurs, a replacement will be provided as they are hard to repair. The oil pump can be easily replaced and does not need any special tools. Remove the nuts screwing the clutch cover, disengage the chain cover, and unthread the clutch from the crankshaft.

Further, unscrew the oil pump and front cover. Replace the old oil pump with a new one and follow the reverse process to make your chainsaw running smoothly as before. Ensure there is sufficient oil in the guide bar hole and use an air compressor to remove sawdust or dirt, do not run the chainsaw dry to prevent burning of the guide bar and chain breakage.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • OIL PIPE & FILTER FOR CHINESE CHAINSAWS

    OIL PIPE & FILTER FOR CHINESE CHAINSAWS 4500 5200 5800 45CC 52CC MT-9999 TARUS

    CPO

    £3.49 Inc. VAT
    £2.91 Ex. VAT
    Oil supply pipe & oil filter set For Chinese chainsaws,45 cc ,52 cc ,58 cc Fits for many Chinese made chainsaw models. Please check your old parts with the ones shown in the picture to ensure this is the parts you require as there are several...
    £3.49 Inc. VAT
    £2.91 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £3.49 Inc. VAT
    £2.91 Ex. VAT
    Subtotal:
  • Oil pump piston shaft for Husqvarna

    Oil pump piston shaft for Husqvarna 235, 235e, 236, 236e, 240, 240e,Made in Europe OEM 530057932

    PEJO

    £3.90 Inc. VAT
    £3.25 Ex. VAT
    Oil pump piston shaft for Husqvarna 235, 235e, 236, 236e, 240, 240e Replaces 530057932  Top quality spare part   Made in Europe
    £3.90 Inc. VAT
    £3.25 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £3.90 Inc. VAT
    £3.25 Ex. VAT
    Subtotal:
  • Oil pump for Chinese chainsaws

    Oil pump for Chinese chainsaws 45 cc 52 cc 58 cc 4500,5200,5800 Tarus (Taurus), Timbertech, Silverline, Kiam Sherwood, Raptor & others

    CPO

    £4.90 Inc. VAT
    £4.08 Ex. VAT
    Oil pump for Chinese chainsaws 45 cc 52 cc 58 cc 4500,5200,5800  To fit Chinese most chainsaws 4500, 5200, 5800, as Tarus (Taurus), Timbertech, Silverline, Kiam Sherwood, Raptor, Trueshopping, Sanli, Plantiflex, Viron, B&Q, ROK, BBT, Skatco,...
    £4.90 Inc. VAT
    £4.08 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.90 Inc. VAT
    £4.08 Ex. VAT
    Subtotal:
  • Oil pump pipe FOR 4500 5200 5800 CHINESE CHAINSAWS

    Oil pump pipe FOR 4500 5200 5800 CHINESE CHAINSAWS,fits most models

    CPO

    £2.99 Inc. VAT
    £2.49 Ex. VAT
    Oil pump pipe FOR 4500 5200 5800 CHINESE CHAINSAWS,fits most models Please, check your old part with the picture Fast & Free delivery to the UK address !!
    £2.99 Inc. VAT
    £2.49 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £2.99 Inc. VAT
    £2.49 Ex. VAT
    Subtotal:
  • Oil supply hose pipe FOR 4500 5200 5800 CHINESE CHAINSAW

    Oil supply hose pipe FOR 4500 5200 5800 CHINESE CHAINSAW MT-9999 TARUS ECKMAN B&Q BBT & others

    CPO

    £2.99 Inc. VAT
    £2.49 Ex. VAT
    Oil hose  FOR 4500 5200 5800 CHINESE CHAINSAW MT-9999 ECKMAN B&Q BBT Tarus (Taurus), Timbertech, Silverline, Kiam Sherwood, Raptor, Trueshopping & others   Will fits most Chinese 45cc - 58cc chainsaws,please check your old...
    £2.99 Inc. VAT
    £2.49 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £2.99 Inc. VAT
    £2.49 Ex. VAT
    Subtotal:
  • Fuel & oil lines and fuel & oil filters set

    Fuel & oil lines and fuel & oil filters set FOR 4500 5200 5800 CHINESE CHAINSAW MT-9999 TARUS ECKMAN B&Q BBT & others

    CPO

    £4.40 Inc. VAT
    £3.67 Ex. VAT
    Fuel line & oil hose + 2 pcs filters set FOR 4500 5200 5800 CHINESE CHAINSAW MT-9999 ECKMAN B&Q BBT Tarus (Taurus), Timbertech, Silverline, Kiam Sherwood, Raptor, Trueshopping & others As per picture you will receive fuel line,oil...
    £4.40 Inc. VAT
    £3.67 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.40 Inc. VAT
    £3.67 Ex. VAT
    Subtotal:
  • Oil pump cover for Chinese 45 cc 52 cc 58 cc chainsaws

    Oil pump cover for Chinese 45 cc 52 cc 58 cc chainsaws Tarus (Taurus), Timbertech, Silverline, Kiam Sherwood, Raptor, Trueshopping & others

    CPO

    £2.95 Inc. VAT
    £2.46 Ex. VAT
    Oil pump cover for Chinese 45 cc 52 cc 58 cc chainsaws Tarus (Taurus), Timbertech, Silverline, Kiam Sherwood, Raptor, Trueshopping & others Will fits most Chinese 45cc - 58cc chainsaws,please check your old part with the picture Fast & Free...
    £2.95 Inc. VAT
    £2.46 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £2.95 Inc. VAT
    £2.46 Ex. VAT
    Subtotal:
  • Husqvarna 357xp,359 oil pump worm gear for 325'' chains OEM 503912702

    Husqvarna 357xp,359 oil pump worm gear for 325'' chains OEM 503912702

    BASEH

    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Husqvarna 357xp,359 oil pump worm gear . Suitable only for 325'' chains. Brand new. Replaces OEM   503912702 This is high quality non original replacement part,made in Turkey
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Subtotal:
  • Husqvarna 545, 550, 555, 560 Jonsered 2252, 2253, 2258, 2260 oil pump worm OEM 505200801

    Husqvarna 545, 550, 555, 560 Jonsered 2252, 2253, 2258, 2260 oil pump worm OEM 505200801

    BASEH

    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Husqvarna 545, 550, 555, 560 Jonsered 2252, 2253, 2258, 2260 oil pump worm Replaces OEM 505200801 Made in Turkey
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Subtotal:
  • Husqvarna Oil Oiler Pump Worm Gear for 254 257 261 262 chainsaws OEM 503557801 Husqvarna Oil Oiler Pump Worm Gear for 254 257 261 262 chainsaws OEM 503557801

    Husqvarna Oil Oiler Pump Worm Gear for 254 257 261 262 chainsaws OEM 503557801

    BASEH

    £4.20 Inc. VAT
    £3.50 Ex. VAT
    NEW non genuine Husqvarna Oil Oiler Pump Drive Worm Gear. Refer to part number 503557801.Fits the following Husqvarna models:· 254 (1994-06)-->Oil Pump/Clutch· 254 (1996-01)-->Clutch Assembly· 254 (1998-03)-->Oil...
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Subtotal:
  • OIL PUMP WORM DRIVE FOR CHINESE CHAINSAW 2500 25CC TIMBERPRO LAWNFLITE CARLTON PAINIER OIL PUMP WORM DRIVE FOR CHINESE CHAINSAW 2500 25CC TIMBERPRO LAWNFLITE CARLTON PAINIER

    OIL PUMP WORM DRIVE FOR CHINESE CHAINSAW 2500 25CC TIMBERPRO LAWNFLITE CARLTON PAINIER,Made in EU

    PEJO

    £3.99 Inc. VAT
    £3.32 Ex. VAT
    OIL PUMP WORM DRIVE FOR CHINESE CHAINSAW 2500 25CC TIMBERPRO LAWNFLITE CARLTON PAINIER,others Top quality replacement part Made in Europe
    £3.99 Inc. VAT
    £3.32 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £3.99 Inc. VAT
    £3.32 Ex. VAT
    Subtotal:
  • OIL PUMP WORM FOR CHINESE 62 CC 6200 CHAINSAWS

    OIL PUMP WORM FOR CHINESE 62 CC 6200 CHAINSAWS

    EMAS

    £4.20 Inc. VAT
    £3.50 Ex. VAT
    OIL PUMP WORM  FOR CHINESE 62 CC 6200 CHAINSAWS Please check your old part with the pictures
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Qty in Cart: 0
    Quantity:
    Price:
    £4.20 Inc. VAT
    £3.50 Ex. VAT
    Subtotal:
  • Total: items /

Adding your products to cart