OIL PUMPS,WORMS,HOSES
Buy Reliable Oil Pump, Worm, and Hose from Chainsaw Parts Online
Oil is essential for the lubrication of the chain and guide bar. Without it, the friction between the chain and the bar and the object and the chainsaw will increase, resulting in heating. It will also strain the engine and reduce its life if not lubricated for a long time. An oil pump manages the presence of oil throughout the chain and the guide bar when it is operated. The oil pump is attached to the clutch, and it flows the oil through the hose into the hole and over the guide bar. The proper working of oil pump can be checked in the following ways:
Oil tank level: If there is full oil even after several usages, the oil pump is not channelling the oil.
Manual check: Check the chain by running your hand over it or using tissue paper. If it is dry, then the oil pump should be taken out and replaced.
Oil spit: Use an object and hold the chainsaw about an inch or two, turn it on, and see if oil spits on the object afterward.
An oil worm is a small l shaped part attached to a circular drum fitted under the clutch and rotates when the machine is started to provide the oil uniformly. These are usually made of metal and plastic. Irregular pressing of clutch or not filling oil will cause this part to break off, and the oil will start leaking to the bottom of the chainsaw instead of reaching the bar and chain.
The oil line or hose is a small tube with a filter attached which provides the supply of oil from the oil tank and is made up of rubber which develops cracks or gets punctured with time. It can be checked when there is plenty of oil on the saw bed, also the oil tank becomes empty frequently. The oil line is present under the handle, and its replacement requires the removal of the front handle and chainsaw cover.
Buy high-quality and low-priced oil pumps, worms, hoses from Chainsaw Parts Online shop. Choose from the best fit and verify from the pictures given on the product page. Our manufacturers thoroughly test these, and many come with a two-year warranty, so if any defect occurs, a replacement will be provided as they are hard to repair. The oil pump can be easily replaced and does not need any special tools. Remove the nuts screwing the clutch cover, disengage the chain cover, and unthread the clutch from the crankshaft.
Further, unscrew the oil pump and front cover. Replace the old oil pump with a new one and follow the reverse process to make your chainsaw running smoothly as before. Ensure there is sufficient oil in the guide bar hole and use an air compressor to remove sawdust or dirt, do not run the chainsaw dry to prevent burning of the guide bar and chain breakage.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Partner 650 chainsaw worm gear & oil pump spur wheel,new Quality aftermarket spare parts,made in Europe
PEJO
£17.29 Inc. VAT£14.41 Ex. VATPartner 650 worm gear & oil pump spur wheel Brand new. This is very good quality non original replacement part,made in Europe. We are an official authorized PEJO dealer in UK. Please,check your old part with the pictures and ensure you...£17.29 Inc. VAT£14.41 Ex. VAT -
Stihl 028,028 AV worm gear & oil pump spur wheel,1119 640 7100 & 1119 642 1501 Quality aftermarket spare parts,made in Europe
PEJO
£16.29 Inc. VAT£13.57 Ex. VATStihl 028,028 AV worm gear & oil pump spur wheel Brand new. Replaces OEM part numbers: 1119 640 7100 & 1119 642 1501 This is very good quality non original replacement part,made in Europe. We are an official authorized PEJO...£16.29 Inc. VAT£13.57 Ex. VAT -
OIL PUMP Gear Shaft & Worm drive gear for Stihl 050 051 075 076 chainsaw,25 mm Quality aftermarket spare parts,made in Europe
PEJO
£17.89 Inc. VAT£14.91 Ex. VATStihl 050 051 075 076 chainsaw OIL PUMP Gear Shaft & Worm drive gear ,25 mm diameter. Brand new. This is very good quality non original replacement part,made in Europe. We are an official authorized PEJO dealer in UK. Please,check...£17.89 Inc. VAT£14.91 Ex. VAT -
Stihl MS 380,MS 381 ,038 chainsaw oil pump assembly with drive gear OEM 1119 640 3200
Farmertec
£18.29 Inc. VAT£15.24 Ex. VATStihl MS 380,MS 381,038 oil pump & drive gear . Brand new Replaces OEM 1119 640 3200 This is good quality non original replacement part.£18.29 Inc. VAT£15.24 Ex. VAT -
Stihl MS 341,MS 361,MS 362,MS 400 chainsaw oil pump OEM 1135 640 3200
Farmertec
£16.99 Inc. VAT£14.16 Ex. VATStihl MS 341,MS 361,MS 362, MS 400 oil pump Brand new OEM part number: 1135 640 3200 This is good quality non original replacement part.£16.99 Inc. VAT£14.16 Ex. VAT